Phone Support: MON-FRI 7:30AM-4PM (PST)
Car lift power units provide the hydraulic power needed to raise and lower many types of automotive lifts. Whether you're replacing a failed unit or repairing an existing vehicle lift, choosing the correct hydraulic power unit is essential for proper lift operation, performance and safety.
At GarageAppeal.com, you'll find hydraulic power units for car lifts from Duro and other leading manufacturers. Available power units can be used with compatible 2-post lifts, 4-post lifts and other hydraulic automotive lift systems.
Because specifications vary between lift manufacturers and models, replacement power units should be selected based on compatibility—not simply appearance, horsepower or voltage.
A hydraulic car lift power unit typically combines an electric motor, hydraulic pump, fluid reservoir and related valves or controls into a single assembly.
When activated, the electric motor drives the hydraulic pump, creating the pressure and fluid movement required by the lift's hydraulic system. The exact operation varies by lift design and manufacturer.
If you're replacing an existing car lift hydraulic power unit, compare the specifications of the original equipment with the replacement unit carefully. Voltage, motor specifications, hydraulic pressure, reservoir capacity, mounting configuration, fittings and controls may all affect compatibility.
Voltage is one of the first specifications to verify when choosing a replacement power unit.
Depending on the lift and power unit manufacturer, automotive lift power units may be available in different electrical configurations, including 110V/120V and 220V/230V systems.
A 110V unit should not automatically be considered interchangeable with a 220V unit, even if the units appear similar. The lift's electrical requirements and the power unit's motor, pump and hydraulic specifications must be compatible with the equipment.
If you're searching specifically for a 220V car lift hydraulic power unit, verify the required voltage and all other specifications against your existing lift before ordering.
Many hydraulic 2-post car lifts rely on an electric-hydraulic power unit to operate the lifting system.
When replacing a 2-post lift power unit, it's important to identify the lift manufacturer and model whenever possible. You should also compare voltage, horsepower, hydraulic specifications, reservoir size, mounting arrangement and connections with the original unit.
A power unit that physically fits the lift is not necessarily an appropriate replacement.
Hydraulic 4-post car lifts can also require replacement power units as components wear or fail over time.
As with a 2-post lift, compatibility is critical. Different 4-post lifts can use different electrical and hydraulic configurations, even when their lifting capacities are similar.
Before purchasing a 4-post lift power unit, identify the lift model and review the manufacturer's requirements or specifications for the original hydraulic system.
GarageAppeal.com offers Duro hydraulic power units for compatible automotive lift applications.
If you have a Duro 2-post or 4-post lift and need a replacement power unit, start by identifying the exact lift model and the specifications of the existing power unit. Duro power units and replacement components can vary depending on the lift and application.
Matching the correct replacement unit helps ensure that the motor, pump, reservoir, electrical configuration and hydraulic system are appropriate for the lift.
A malfunctioning lift doesn't always mean the entire hydraulic power unit needs to be replaced. Problems can potentially involve the motor, pump, valves, electrical components, hydraulic fluid or other parts of the lift system.
If replacement is required, gather as much information as possible from the existing lift and power unit before ordering.
Useful information can include:
Photos of the existing power-unit identification plate and lift model information can also be useful when determining compatibility.
Don't select an automotive lift power unit based solely on the lift's rated capacity.
Two lifts with similar capacities may use very different hydraulic and electrical systems. A replacement unit must be appropriate for the specific equipment and application.
When comparing power units, verify the manufacturer's compatibility information and specifications. Installing an incorrect power unit can affect lift performance and may create safety or equipment-damage concerns.
If you're unsure which replacement power unit fits your lift, contact GarageAppeal.com with the manufacturer, model and available power-unit information before ordering.
A car lift power unit is the assembly that supplies hydraulic power to many automotive lifts. It commonly incorporates an electric motor, hydraulic pump, reservoir and control components.
Many automotive lift power units can be replaced, but the replacement must be compatible with the lift's electrical and hydraulic requirements. Identify the lift and existing power unit before purchasing a replacement.
Not necessarily. Voltage is only one specification that must match the application. Motor, pump, hydraulic, control and mounting requirements can also differ.
Start with the lift manufacturer and exact model number. Compare the original power unit's specifications with the replacement and verify manufacturer compatibility whenever possible.
Many 4-post automotive lifts use hydraulic power units, although designs vary by manufacturer and model. Consult the lift specifications before selecting replacement equipment.
Yes. GarageAppeal.com offers Duro power units for compatible automotive lift applications. Verify your lift model and existing power-unit specifications before selecting a replacement.
Not exactly. The hydraulic pump is typically one component within the complete power unit. A complete hydraulic power unit may also contain the electric motor, reservoir, valves and controls.
Shop car lift power units and hydraulic power units at GarageAppeal.com for compatible automotive lift applications. Explore our complete selection of Car Lifts, and compare voltage, hydraulic specifications, lift compatibility and manufacturer requirements to find the appropriate replacement power unit for your equipment.
