OTC 1585A 1,250 lb Capacity Power Train Lift

The OTC 1585A 1,250 lb Capacity Power Train Lift is designed for the removal, installation, and positioning of engine and transaxle assemblies in professional automotive repair shops. Particularly useful for front-wheel-drive vehicle service, this air/hydraulic lift supports loads up to 1,250 lbs. and provides a 29-1/2" to 68-1/2" lifting range.

The OTC 1585A features an adjustable support table with wooden support blocks, a tilting plate for component alignment, and a nylon retaining strap to help secure the load. Its compact design and swivel casters allow technicians to maneuver the lift around the shop and beneath vehicles. The included OTC 4020 air/hydraulic pump operates using a shop air supply, providing controlled lifting and lowering during power train service.

OTC 1585A Features & Benefits

• 1,250 lb Lifting Capacity: Supports compatible engine and transaxle assemblies during removal, installation, and positioning.
• Designed for Front-Wheel-Drive Service: Particularly useful for handling combined engine and transaxle assemblies on front-wheel-drive vehicles.
• Air/Hydraulic Operation: Includes the OTC 4020 air/hydraulic pump for lifting and lowering using a shop air supply.
• 29-1/2" to 68-1/2" Lift Range: Provides adjustable working height for power train removal and installation.
• Tilting Support Plate: Offers 22° front-to-back and 17° side-to-side tilt to assist with positioning and alignment.
• Adjustable Wooden Support Blocks: The width between support blocks adjusts from 0" to 29" to accommodate different component configurations.
• Nylon Retaining Strap: Helps secure the supported assembly to the lift during service.
• 20-1/2" x 30-1/2" Table: Provides a broad support surface for compatible power train components.
• Swivel Casters: Allow technicians to maneuver the lift around the shop and position it beneath the vehicle.
• Versatile Shop Equipment: In addition to engine/transaxle assemblies, the lift can assist with compatible rear-end assemblies, leaf springs, and other components within its rated capacity.

OTC 1585A Specifications

What's Included

• OTC 1585A Power Train Lift
• Tilting Support Plate
• Adjustable Wooden Support Blocks
• Nylon Load-Retaining Strap
• OTC 4020 Air/Hydraulic Pump
• Assembly and Operating Instructions

Professional Engine & Transaxle Service

The OTC 1585A Power Train Lift provides a dedicated lifting solution for automotive repair facilities servicing engine and transaxle assemblies. Its adjustable support blocks, retaining strap, and tilting plate help technicians support and align compatible components during removal and installation.

With a 1,250 lb capacity, air/hydraulic operation, and a 29-1/2" to 68-1/2" lifting range, the OTC 1585A is a practical addition to professional shops performing front-wheel-drive power train service.