Lift 25,000 lbs. for Full Wheel Service Capability
Two RBJ25000 rolling bridge jacks will handle a vehicle up to 50,000 lbs. That means these jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS40, you can safely perform wheel service with the RBJ-25000 rolling bridge jack.
Rubber contact pads
The point of contact on your vehicle frame is the most important part of lifting. So, we make the rubber contact pads on our bridge jacks hard and durable enough to lift the monsters in your shop. Heavy-duty fleets are no problem for the RBJ25000.
All those firetrucks, dumpster trucks, Greyhound™ Buses, etc. have extended lift points and raised chassis. That’s why we include a stackable adapter set with every bridge jack sold. We also recommend you consider the optional truck adapter set, whose frame cradle design ensures heavy frames down shift off the lift pad.
High-pressure hydraulic power unit
A powerful pneumatic-hydraulic power unit creates a dedicated power source for the rolling bridge jack. Two jacks will have separate airlines that can connect together on an airline kit. The foot pedal is air-powered, so a few simple pushes and the jack is fully lifted.
Three lock levels
Lift to three lock positions for your convenience. The higher the jack, the more undercarriage clearance you get on your four-post lift. Every rolling bridge jack offers premium safety standards at every lock position. The RBJ25000 is over-engineered to easily raise 25,000 lbs. in seconds flat.
- 25,000-lb. lifting capacity
- Rubber contact pads
- Stackable adapters
- High-pressure hydraulic power unit
- Optional air-line kit
Lifting Capacity* 25,000 lbs. (11,340 kg)
A - Max. Height + Pad Only: 23" (584 mm)
B - Max. Height + Pad + Adapter: 26" (660 mm)
C - Min. Height + Pad Only: 17" (432 mm)
D - Min. Height + Pad + Adapter: 18" (457 mm)
Time to Full Rise: 45 seconds
F - Support Arm Width: 44.9" (1,140 mm) -
G - Max. Arm Reach: 63.5" (1,613 mm)
H - Min. Arm Reach: 39.5" (1,003 mm)
Motor: Air-Hydraulic Pump
Noise: 45 dB
Dimensions: 36" x 22" x 21" / 914 mm x 559 mm x 533 mm
Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.
- Free Shipping