null

QuickJack 5000TLX 5,000 Lb. Capacity Extended Portable Car Lift

$1,825.00
Free_shipping:
Free Shipping
(No reviews yet) Write a Review
SKU:
#5175635
Availability:
Usually ships in 5-10 Business Days
 

Why did we develop the 5000TLX? Simple: the 5000TL has a limiting lift point reach of 60". That works for most vehicles, but there are vehicles whose manufacturer-recommended lift points are just an inch or two out of reach. That sounds like a small difference, but professional shops and smart DIY'ers know never to take chances with an off-balance load.

The 5000TLX has a 66" lift point reach that's long enough for virtually every consumer vehicle type out there (with the exception of certain electric vehicles, for which we offer the 6000ELX). Many auto detailing and repair shops can’t fit a full-size car lift in their space, and there hasn’t been an industry response to meet these needs. We heard the community’s call and immediately went to work perfecting the TLX series. It's our pleasure to introduce the world’s first professional-grade home car lift. Of course, commercial garages will get just as much use out of it.

Looking to lift more weight with an extended-length frame? Check out the 7000TLX car lift.

Setup for the 5000TLX car lift is the same as it is for any other TL model. You still get 5,000 lbs. of lift, auto-locking safety bars, 30-second rise and one-touch button controls. Because we stretched our TLX models an extra 6" to accommodate some late-model cars, the overall frame length is also slightly longer. So, if you’re into Smart Cars or other super-short wheelbase vehicles, be sure to measure first—these frames are probably too long. For vehicles with jack points that are a little closer together, we recommend the 5000TL. However, the TLX will often accommodate shorter vehicles too. We ask that you measure your wheelbase(s), re-measure, and then measure again. Better safe than sorry.

EXTENDED-LENGTH car lift design

The 5000TLX portable car lift has been redesigned to accommodate vehicles with longer wheelbases. We’ve increased the overall frame length and lift point spread by 6". As a result, the minimum lift point spread is now 6" longer, as well. Our new portable car lift design better accommodates longer wheelbases and/or extended lift point spreads.

TL minimum lift point spread: 37"
TLX minimum lift point spread: 43"

TL maximum lift point spread: 60"
TLX maximum lift point spread: 66"

TL overall frame length: 70"
TLX overall frame length: 76"

Features

Automatic safety locks

Features dual-position automatic safety locks on each TL frame. As the frames rise, these locks glide securely into place at mid-rise and full-rise. Disengage with a simple flip of the lock bar and your car lift is ready for a smooth descent.

Increased lifting height

QuickJack TL models are capable of lifting an extra 3-inches making it easier to perform vehicle maintenance tasks that are both routine and more involved. The extra room gives you more ability and versatility under the vehicle, while doing so in added comfort.

One-handed operation

By holding the pendant control in one hand, your other hand is totally free. No cranking or bending during lifting.

Accessories to increase versatility

Most QuickJack accessories were developed from customer suggestion and need. We offer many different lifting options and configurations to customize your QuickJack experience to fit your needs and specifications.

Tech specs

Lifting capacity

5,000 lbs. (2,268 kg)

Lowered height

A - Frame only: 3" (76 mm)
B - With 2" block: 3.5" (89 mm)

Lifting height

D - With 2" block: 21" (521 mm)
E - With 3" block: 22" (546 mm)
F - Max. height: 24" (616 mm)
G - With adapters: 24" (597 mm)
H - With adapters + pin: 26.75" (673 mm)

Lift point spread

I - Maximum: 66" (1,676 mm)
J - Minimum: 43" (1,092 mm)

Frame dimensions (ea.)

K - Width: 11" (278 mm)
L - Length: 76" (1,930 mm)
A - Height (lowered): 3" (76 mm)
Weight: 81.5 lbs. (37 kg)

Other specs

Power/Voltage: 110V, 60HZ, 1PH
Time to full rise: 30 seconds
Power unit weight: 15 lbs. (7 kg)
Shipping dimensions (ea. frame):
79.5" (L) x 15.25" (W) x 5" (H)
(2,015 mm x 385 mm x 129 mm)
Shipping weight: 250 lbs. (113 kg)

What's inside?

5000TLX Left Frame Assembly

5000TLX Right Frame Assembly

1x Hydraulic power unit with control

4x Medium rubber lift blocks (2")

4x Tall rubber lift blocks (3")

2x Short hydraulic hoses

2x Long hydraulic hoses

2x Frame-positioning handles

Fittings and thread tape for setup

Instruction manual

Requirements:

Up to 3 liters of Automatic Transmission Fluid

Air source to inflate air cylinders up to 50 PSI

Assembly tools


Note: QuickJack is shipped in three boxes

Click here for Setup and Operation Manual

Free_shipping:
Free Shipping